Altec Lansing Industrial Professional Sound Products Spec site

ALTEC LANSING INDUSTRIAL PROFESSIONAL SOUND PRODUCTS SIGNAL PROCESSOR LIST

Altec Powered Mixers

 

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION

8431A & 8432A Programmable Equalizers

page 3

 

<< Previous

The mixer also contains two auxiliary input channels for high-impedance line or tape sources. These channels have independent monitor sends, pan pots, and slide faders.

8431 A/8432A
Programmable Equalizers

KEY SPECIFICATIONS
Frequency Response: 20 Hz 20 kHz, ±1 dB
(with HPF and LPF at 10 Hz and 32 kHz respectively).

% (Total Harmonic Distortion + Noise): < 0.01% (at unity gain from 20 Hz to 20 kHz).

Noise Floor: < -88 dBm (A-weighted at unity gain, HPF and LPF at 10 Hz and 32 kHz respectively).

< -86 dBm
(22 Hz to 22 kHz at unity gain, HPF and LPF at 10 Hz and 32 kHz respectively).

Dynamic Range: > 106 dB.

Input Circuitry:
Type: Electronically-balanced.
Impedance: 30 kQ balanced or unbalanced.
Nominal level: 0 dBu (0.775 vrms).
Maximum level: +20 dBu.

Output Circuitry:
Type: Electronically-balanced.
Source impedance: 5052.
Min. load impedance: 60052.
Nominal power: 0 dBm (0.775 vrms across
600Q load).
Maximum power: +20 dBm.

DESCRIPTION


The Altec Lansing models 8431A/8432A are 28 band, one-third octave programmable equalizers. The 8431A is a single channel and the 8432A offers two independent channels. Two versions of each unit are offered. The -PA232 version uses the standard RS-232 protocol and may be connected to an RS-232 port without external adapters. The -PA422 version conforms to the standard PA-422 communications protocol, allows for longer control cable runs, and is useable with other PA-422 compatible products.
The equalizers are programmed using AcoustaGRAPHICS"', a menu-driven software program. This software, along with the unique packaging of the units, makes these equalizers ideal for situations which require tamper-proof, compact and reliable equalization.
The unit allows 0-10 dB of boost/cut per band in 1/2 dB steps, and a master gain control offering 0-10 dB in 1/2 dB steps. Each channel has seven nonvolatile memory locations and one active memory. High and low pass filters offer programmable corner frequencies for each channel. A Remote Memory Select switch (per channel) allows for external closures to reprogram the equalizer from a preset memory. An EQ Bypass switch allows the user to easily remove the signal from a processed channel.
There are two optional plug-in isolation transformers available: the 15550A input transformer and the 15560A output transformer.


Next >>

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION

aLTEC aMPLIFIER aCCESSORIES SECTION Altec Amplifier Section Altec Microphone section  
Altec Powered Mixers and Misc
Altec Mixers sections
 
Specifications Catalog Table of Contents

 

 

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION