Altec Lansing Industrial Professional Sound Products Spec site

ALTEC LANSING INDUSTRIAL PROFESSIONAL SOUND PRODUCTS MIXER LIST

Altec Mixer Section

 

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION

 

1700C Six Channel Mainframe Mixer/PreAmplifier

page 3

 

<< Previous

1700C Six Channel Mainframe Mixer PreAmplifier

Description
The Altec Lansing 1780A/1780AT Mic/Line Input modules combine basic microphone preamplification with true line level input capability. The module has a built-in resistive pad to permit levels in excess of 0 dBu and its high input impedance easily allows sixteen modules to be driven from a single low impedance source. Also, the module offers a 300 Hz high-pass filter, phantom power capability, L + R stereo summing, and 0 to 50 dB of continuously variable gain. Included in the 1780AT version is a 10 kSZ input bridging transformer for those who prefer transformer isolation.

Gain: 0 - 50 dB, continuously variable

Input Sensitivity:
Without Pad: -68 dBu to -18 dBu
(.3 mVrms to 100 mVrms)
With Pad: -48 dBu to +2 dBu
(3 mVrms to 1 Vrms)

Input Impedance:
1780A: 10 kSZ
1780AT: 10 kS2
With 1793 Dual Phono: 40 kSZ

Frequency Response: 50 Hz - 20 kHz, ±1 dB

Total
Harmonic Distortion: (Ref. minimum gain,
50 Hz - 20 kHz measurement bandwidth, 30 kHz low-pass filter)
1780A: <0.01%
1780AT: <0.025%

Equivalent Input Noise: <-120 dBr
(Ref. 0 dBr = 100 mVrms output, 10 kS2 load, 200 12 input termination, maximum gain, A-weighted)

High Pass Filter:
Comer Frequency: 300 Hz
Slope: 12 dB/octave

Controls: I - Gain, continuously

variable

Weight (Net):
1780A: 2.5 oz. (70 g)
1780AT: 3.0 oz. (85 g)

Power Supply
Requirements: -* 18 VDC at 15 ma DC (supplied by mainframe)

Included Accessories: 1- 2-pin female jumper (for phantom power) 2 - mounting screws
(for potentiometer bracket) 1 - Operating Instructions

Next >>

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION

aLTEC aMPLIFIER aCCESSORIES SECTION Altec Amplifier Section Altec Microphone section  
Altec Powered Mixers and Misc
Altec Signal Processing sections
 
Specifications Catalog Table of Contents

 

 

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION